本人整合的完整的WF4.0之CRACK含公差分析和疲劳分析模块

高手

真是个好东西，现保存起来

为什么我安装后没有D:proeWildfire 4.0mechi486_ntbin和D:proeWildfire 4.0mechi486_ntptc这两个文件夹呀

我用的是gellmaR的破解，不知道全不全，但是破解的方法要比楼主的简单，改完MAC后只运行一个文件就破解了，而且不用管这个文件在什么地方，另外还能用在3.0的破解。我把破解方法和文件上传，大家可以看看：

1. Open "license.dat" in any text editor and change all strings "YOUR_HOST_ID" for your computer real Host_ID (your Network Card MAC-adress) and save

2. If your want to run  ProE Wildfire 4.0 F000 (and higher) go to  6.

3. If your want to use this "license.dat" for ProE Wildfire 4.0 C000 (PreProduction) change all strings "ptc_d 29.0" in "license.dat" for "ptc_d 28.0", save and go to 6.

4. If your want to use this "license.dat" for ProE Wildfire 3.0 (any build) change all strings "ptc_d 29.0" in "license.dat" for "ptc_d 27.0", save and go to 6.

5. Install ProE WF4 F000 or  ProE WF4 C000 (PreProduction) or ProE WF3 (any build)) and/or  ProE Mechanica (any build) using "license.dat" as "Nodelocked License File. (No Server running)"

6. Run ProE_WF3_Mxxx_WF4_crk.exe

7. Wait for system messages
    "ro/ENGINEER 3: successsfully patched!"
    "Pro/Mechanica 3: successsfully patched!"

8. Click OK
That's all..

P.S. If you did not install Pro/Mechanica  you will get a message
   "Pro/Mechanica 3: product not installed or files not found!"
Click OK

Cracked by gellmaR

非常感谢，不知道可不可以安装，有安装过的说个话呀

非常感谢

非常感谢

楼主真乃强人，不过已经装好了

为什么我按步骤点击proe-patch.exe，prom-patch1.exe，prom-patch2.exeCRACK里边出现cannot     find   pattern 这句话，结果打开pro/e程序后里边菜单（公差研究）对话框没有，

先下载了,感谢楼主的贡献!